Free Shipping on Orders $49.95+ (Limited Time Only!)

P4 Sniper Scope for Air Guns and Rifles

The NcStar P4 Sniper is a 3-9x40 riflescope for air guns and rifles, with a plex-style P4 Sniper reticle and a 1-inch tube machined from aircraft-grade aluminum. The 40mm objective lens gives a bright image. At 100 yards the field of view is 36.6 ft at 3x and 13.6 ft at 9x. O-ring seals make it waterproof and fogproof, and the body is rated shockproof. Weaver-style aluminum rings and lens covers are included, so it can go on a Weaver or Picatinny base as soon as it arrives. It suits shooters who want an affordable, all-round scope for plinking, pest control or general hunting.

In stock

SKU
SFB3940R
$31.00
Secure Payments at Keep Shooting visa mastercard american-express discover Pay with BitCoin at Keep Shooting

Description

3-9x40 Scope For Rifles

The NcStar P4 Sniper is a 3-9x40 variable-power riflescope for air guns and centerfire or rimfire rifles. At 3x you have a wide view for finding targets and moving game. Turn the power ring to 9x for smaller targets and longer shots. It is a sensible first scope for a plinking rifle, an air rifle used for pest control, or a hunting rifle that needs dependable glass without much setup, and it ships with mounting rings so you can fit it straight away.

Features

  • 3-9x Variable Magnification — The power ring near the eyepiece adjusts the image from three to nine times life size.
  • 40mm Objective Lens — The front lens is 40mm across, which lets in enough light for a clear picture in early morning and late afternoon.
  • P4 Sniper Reticle — A plex-style crosshair, with heavy outer posts that taper to fine center lines, draws the eye to the aiming point quickly and still leaves a precise center for careful shots.
  • 1-Inch Aluminum Tube — The 1 in (28mm) main tube is machined from aircraft-grade aluminum alloy and finished in non-reflective matte black.
  • O-Ring Sealed Construction — Rubber O-ring seals keep moisture out, so the scope is waterproof and fogproof, and the body is also rated shockproof.
  • Wide Field Of View — You see 36.6 ft of target area at 100 yards on 3x, narrowing to 13.6 ft at 9x.
  • Eye Relief — Eye relief, the distance between your eye and the rear lens for a full sight picture, runs 2.76 in at 3x and 3.35 in at 9x.
  • Weaver-Style Rings Included — Aluminum rings for Weaver-style bases come in the box, together with lens covers to protect both ends of the glass.
  • Compact Dimensions — The scope is 12.2 in (31 cm) long and weighs 19.5 oz (553 g), short enough for most rifle and air gun receivers.

Build And Mounting

Turrets on top and on the side adjust elevation and windage, and the sealed aluminum body is made for field use in wet or cold conditions. The included rings clamp to a Weaver-style base or Picatinny rail. If your air gun has an 11mm dovetail rail, you will need dovetail rings. The eye relief is on the short side, so set the scope far enough forward on rifles with noticeable recoil to keep the eyepiece clear of your brow.

More Information

More From Brand
NcStar logo Shop all NcStar

Customer Reviews

Write Your Own Review
You're reviewing: P4 Sniper Scope for Air Guns and Rifles
Your Rating:
loader
Loading...

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.

Loading...
loader
Loading...