PMC XTAC 762NATO 20 Rounds 147Gr Full Metal Jacket

7.62 NATO Range Load

PMC's X-TAC 7.62x51mm NATO is standard-pressure M80 ball ammunition built for practice, training, and high-volume range work in battle rifles and modern sporting rifles. Each 147-grain full metal jacket boat-tail bullet is loaded to a NATO specification, so it feeds and functions the way your rifle expects. It is the round that semi-auto owners run through an M1A, AR-10, FAL, G3, or any .308 Winchester platform when they want reliable, affordable volume.

Features

• 7.62x51mm NATO Caliber — The military designation that matches commercial .308 Winchester chambers, so most .308 rifles will run it.
• 147-Grain FMJ-BT Bullet — A full metal jacket with a tapered boat-tail base, meaning the rear of the bullet is angled to cut drag and hold velocity downrange.
• M80 Ball Specification — Loaded to the military's standard ball load, the general-purpose round rifles are designed and sighted around.
• 2,800 FPS Muzzle Velocity — The speed the bullet leaves the barrel, consistent with NATO ball performance for predictable point of impact.
• Brass Case, Boxer Primer — Reloadable brass cases with a single-flash-hole Boxer primer, the type most handloaders can resize and refill.
• Non-Corrosive Primer — Will not pit the bore, so routine cleaning after a range session is all that is needed.
• 20 Rounds Per Box — Boxes stack into larger commercial cases, with 500-round cases available as 25 boxes of 20.
• Jacketed For Clean Feeding — The copper jacket wraps the lead core for consistent chambering and reduced bore fouling over a long day of shooting.

Build And Use

PMC loads the X-TAC line in Korea to NATO specification, and the same ball ammunition is tested and carried by military and law enforcement users. The 147-grain FMJ-BT projectile is suited to target shooting, training, and function testing rather than hunting or self-defense. If you own a .308 or 7.62 NATO rifle and want case-quantity practice ammo that feeds cleanly and leaves reloadable brass behind, this is a straightforward choice.