Ruger Precision 338 Lapua 5-Round Magazine

Spare Mag for the 338 RPR

This is a factory-spec replacement magazine for the Ruger Precision Rifle chambered in .338 Lapua Magnum. It holds five rounds in a single stack, meaning the cartridges sit in one straight column rather than staggered side to side. Long-range shooters use extra magazines to stage loads for a match or a hunt, and to keep a backup in the bag in case one gets lost or damaged in the field.

Features

• .338 Lapua Magnum Chambering — The magazine is sized for .338 Lapua Magnum and is meant only for the Ruger Precision Rifle in that calibre.
• 5-Round Capacity — It holds five cartridges, a practical load for precision shooting where each shot is deliberate.
• Single-Stack Box Design — Rounds stack in one column, which keeps feeding consistent with a cartridge this long and heavy.
• Blued Steel Body — The body, floor plate and spring are all steel, which stands up to drops, rough handling and repeated loading.
• Black Nitride and Teflon Finish — Nitriding hardens the steel surface against wear and corrosion, and the Teflon coating reduces friction as rounds move up the magazine.
• Steel Feed Lips — The lips at the top, which hold the cartridge in place until the bolt strips it forward, are precision-formed steel.
• Polymer Follower — A black polymer follower, the platform the spring pushes against, lifts each round into position.
• Marked 338 LM (3.850) — The calibre and the 3.850-inch cartridge length are stamped on the spine so you can identify the magazine at a glance.
• Made in USA — U.S.A. and a flag marking are stamped on the side of the body.

Construction and Fit

The steel body carries Accurate-Mag markings on one side, with a full-length stiffening rib pressed into each face. This magazine fits the .338 Lapua Ruger Precision Rifle. It is not meant for other Ruger Precision Rifle calibres or other rifles, so check your chambering before you order. The matte black finish matches the rifle's factory magazine.