SIG SAUER Romeo 5 XDR Gen II 1x20mm 2 MOA Red Dot Sight

Romeo5 XDR Gen II Red Dot

The Sig Sauer Romeo5 XDR Gen II is a 1x20mm rifle red dot built for fast, both-eyes-open aiming on carbines and AR-pattern rifles. A 1x sight has no magnification, so you see the target at its true size with the dot laid over it. The reticle switches between a precise 2 MOA dot and the same dot inside a 65 MOA circle that is quicker to pick up at close range. It runs on a single AAA battery and comes on its own integral mount, so it goes straight onto a picatinny rail.

Features

• Dual 2 MOA Reticle — Choose a 2 MOA dot or a 2 MOA dot with a 65 MOA circle, where one MOA (minute of angle) covers roughly 1 inch at 100 yards.
• 12 Illumination Settings — Ten daylight brightness levels plus two night vision settings, adjusted with the plus and minus buttons on top of the housing.
• 50,000-Hour Run Time — A single AAA battery powers the sight for up to 50,000 hours, and AAA cells are easy to find almost anywhere.
• 1 MOA Click Adjustments — Capped windage and elevation dials marked R and U move the dot 1.0 MOA per click across 100 MOA of total travel.
• Integral Picatinny Mount — The mount is part of the sight body and clamps to a picatinny rail with a cross-bolt nut, with the 65 in-lbs torque value marked on the base.
• 1.41 Inch Sight Height — The optic sits 1.41 in above the rail, a height that puts the dot in line with a natural cheek weld on flat-top rifles.
• CNC Aluminum Housing — The body is CNC machined from aluminum, cut from solid stock for strength without added weight.
• Coated 20mm Objective Lens — Notch, anti-reflective and scratch-resistant coatings on the 20mm lens cut glare and protect the glass.
• IPX-7 Waterproof Rating — Rated IPX-7, the standard for electronics that survive temporary submersion in water.

Size And Specifications

The Romeo5 XDR Gen II measures 4.2 in long, 2.9 in tall and 2.4 in wide (107 x 73 x 61 mm). It weighs 6.4 oz (181 g) without the battery and 6.8 oz (193 g) with it installed. The finish is matte black, and the housing carries Sig Sauer markings and a serial number on the left side. Sig Sauer part number SOR5X201.