Volquartsen Ruger 10/22 Exact Edge Extractor
Out of stock
- SKU
- VC10EE
Description
10/22 Exact Edge Extractor
The extractor is the small hooked part in the bolt that grips the rim of a fired case and pulls it out of the chamber. When that hook is worn or its edge is soft, the rifle can leave empties behind and stall. Volquartsen's Exact Edge Extractor is a replacement for the Ruger 10/22 extractor, made for shooters fixing extraction trouble or upgrading the bolt during a build.
Features
- Ruger 10/22 Fit — The part is shaped to sit in the extractor slot of a Ruger 10/22 bolt.
- Exact Edge Hook — The forward hook is cut to a defined edge so it can take a firm hold on the case rim.
- Rimfire Extraction — It works on the thin rim of .22 LR cases, which is where a rounded or worn hook tends to slip.
- Machined Steel Construction — A solid steel piece with clean, square profiles, as the photograph shows.
- Bare Metal Finish — The surface is left as plain steel with no coating to wear off the working edges.
- Single Replacement Part — You get the extractor only, so the plunger and spring already in your bolt stay in place.
- Volquartsen Manufacture — It comes from a maker known for 10/22 triggers, barrels and internal parts.
Fit and Installation
The Exact Edge Extractor takes the place of the factory extractor in a 10/22 bolt, held in by the bolt's own spring-loaded plunger. Installation means removing the bolt and swapping the part. If you are unsure about servicing the bolt, have a gunsmith fit it. Manufacturer part number VC10EE.
More Information
- More From Brand
-
Shop all Volquartsen
Customer Reviews
Top customer reviews
-
Fixed my 10/22 stovepipe problem instantlyMy bone stock 10/22 was stovepiping about every 15-20 rounds and it was driving me insane. Tried different ammo, different mags, cleaned the bolt face, nothing helped. Did some research on the Rimfire Central forums and everyone said the same thing replace the factory extractor with the Volquartsen. Dropped it in and the difference was immediate. The Exact Edge hook grabs the rim .005" closer than the factory part and you can actually feel the difference when you manually cycle the bolt. Ran 500 rounds of bulk Federal AutoMatch through it last weekend with zero and I mean ZERO failures to extract. The A2 tool steel hardened to Rc 58-60 means this thing is gonna outlast the rifle. For $12 this should be the first upgrade every 10/22 owner makes
A2 tool steel hardened to Rc 58-60, virtually indestructible
Wire EDM cut for exacting tolerances, noticeably better than factoryWish Volquartsen included a small instruction sheet for people who havent taken apart a 10/22 bolt before