Glock OEM Firing Pin Spring Cups
In stock
- SKU
- SP00070
Description
Factory Glock Spring Cups
These are genuine Glock firing pin spring cups, part number SP00070 (also listed as #00070). The cup is the small split piece at the rear of the firing pin assembly. Its two halves clip around the firing pin and hold the firing pin spring captive. If a cup half is cracked, worn or lost during a detail strip, the firing pin assembly cannot be put back together correctly, and this factory pair is the direct replacement.
Features
- Glock OEM Part — OEM, or original equipment manufacturer, means Glock made this part to its own original specification, the same part fitted at the factory.
- Matched Pair Of Halves — The cup comes as two halves that work as a set, so you replace both at once rather than mixing an old half with a new one.
- Stepped Split Design — Each half has a narrow collar and a wider flange, and the two meet along a center split to close around the firing pin.
- Gen 1 Through Gen 5 — The part is listed for all five Glock generations across the compatible models.
- Broad Model Coverage — Fits the G17 and G19 as well as the long-slide G34 and G35, the 10mm G20 and G40, and the .45 ACP G21, G30 and G41.
- Not For G42 Or G43 — The single-stack .380 G42 and 9mm G43 use a different firing pin assembly and need a different part.
- Black Finish — Molded in black to match the factory components it replaces.
- Part Number SP00070 — Matches the Glock reference number, which makes it easy to check against a parts diagram or armorer's list.
Fit And Compatibility
Compatible models are the G17, 17L, 19, 20, 20SF, 21, 21SF, 22, 23, 24, 25, 26, 27, 28, 29, 29SF, 30, 30SF, 30S, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41 and 47. The G42 and G43 are not compatible. Armorers and owners who detail strip their own pistols should keep a spare pair on hand, because the halves are small and easy to lose on the bench.
More Information
- More From Brand
- Similar Products