Volquartsen Ruger 10/22 SureStrike Firing Pin
Out of stock
- SKU
- VC10SSFP
Description
10/22 Replacement Firing Pin
The Volquartsen SureStrike is a replacement firing pin for the Ruger 10/22. The firing pin rides inside the bolt and strikes the cartridge to fire it. A worn, chipped or tired factory pin can cause light strikes, where the rifle clicks and the round does not go off, and swapping in a new pin is one of the first fixes 10/22 owners try. It suits a shooter repairing a rifle that has started misfiring, or a builder putting together an upgraded 10/22 bolt from Volquartsen parts.
Features
- Ruger 10/22 Fit — Made to replace the factory firing pin inside the Ruger 10/22 bolt.
- Rimfire Ignition — The pin strikes the edge of a .22 rimfire case, where the priming compound sits, so a clean, consistent hit on the rim is what fires the round.
- Slotted Retaining Cut — An elongated hole near the rear takes the cross pin that holds the firing pin in the bolt and lets it travel forward and back.
- Flat Bar Profile — The pin follows the flat, stepped shape of the 10/22 design, tapering from the wide rear section to a narrow striking end.
- Relief Notch — A small cut on the lower edge behind the slot matches the profile the 10/22 bolt is built around.
- Dark Finish — A uniform dark gray to black finish covers the part.
- Volquartsen Made — Produced by Volquartsen, a maker known for 10/22 triggers, barrels, bolts and internal parts.
- Single Part — Sold as one firing pin, part number VC10SSFP.
Fit and Installation
The SureStrike goes into the bolt of a Ruger 10/22, so installing it means removing the bolt from the receiver and driving out the firing pin retaining pin. Owners who have stripped a 10/22 bolt before will find it a short job. If you have not, a gunsmith can fit it quickly. Pair it with other Volquartsen bolt parts if you are rebuilding the whole assembly.
More Information
- More From Brand
-
Shop all Volquartsen
Customer Reviews
4.8
100% of customers recommend this product
Share your thoughts with other customers
Top customer reviews
-
Fixed my light strike problemI was having light strikes every once in a while (1-2 times per mag) in my 10/22 with the cheap federal bulk crap. You could see the dimple in the rim but no pop. Installed this pin on a saturday afternoon in probably 20 minutes (youtube video on my phone). Last weekend i put about 400 rounds thru it. Both bulk pack stuff and some cci mini mags. Not ONE failure to fire. Now those that used to just click go bang every time. Only complaint is it's kind of pricey for such a small little guy. Still happy I picked it up though.
No more light strikes even with cheap bulk ammo
Dropped in easy, feels way tougher than the stock pinPricey for one small part
-
GoodMet my needs. I recommend it.