SGM Tactical Saiga 7.62x39 Magazine - 10-Round

Saiga 10-Round Magazine

SGM Tactical built this 10-round magazine for Saiga rifles chambered in 7.62x39mm, the intermediate cartridge shared by the AK and SKS family. The reduced capacity makes it a practical choice where magazine limits apply, and the short body sits low under the rifle for bench and prone shooting. Saiga owners who want a spare that matches the rifle's AK-style feed system are the people it was made for.

Features

• 10-Round Capacity — The body holds ten cartridges, which keeps the magazine short and suits shooters who face capacity restrictions.
• 7.62x39mm Chambering — It feeds the 7.62x39mm cartridge, the round the Saiga rifle in this configuration was built around.
• Designed For Saiga Rifles — SGM Tactical sized and shaped the magazine to seat in Saiga rifles of the matching calibre.
• Black Polymer Body — The molded polymer shell is light and does not rust like a steel body can.
• Curved AK-Pattern Profile — The body curves forward to follow the taper of the 7.62x39mm case, so rounds stack and feed in a smooth arc.
• Front Lug And Rear Catch — A locking lug at the front and a catch at the rear give the familiar rock-in loading: hook the front into the magazine well, then rock it back until the rear locks.
• Flared Floorplate — A lip around the base plate gives your fingers something to grip when you strip the magazine from the rifle.
• Molded SGM Tactical Markings — The maker's logo is molded into the side of the body rather than printed, so it will not wear off.

Build And Fit

The magazine is a one-piece-look polymer body finished in black, with a removable floorplate at the base and a steel pin visible at the rear of the feed lips. It uses the same front-lug, rear-catch arrangement as other AK-pattern magazines, so loading and unloading on a Saiga works the way an AK shooter expects. Its short ten-round length clears the ground and bench rests more easily than a standard-length magazine.