Sig Sauer P320 TekMat

P320 Cleaning Mat

The TekMat for the Sig Sauer P320 is an 11 x 17 inch bench mat printed with a full exploded diagram of the pistol, a drawing that pulls every part apart and numbers it so you can see where each piece sits. Lay it down before you field strip or detail strip the gun and you get a protected work surface and a reference sheet in one. It suits P320 owners doing routine cleaning as well as anyone going deeper into the fire control unit for the first time.

Features

• P320 Exploded Parts Diagram — White line art shows the slide, barrel, striker assembly, fire control unit, grip module and magazine broken out into individual components.
• 52-Part Numbered Parts List — Each component in the drawing carries a number keyed to a printed list, from the frame and sear down to the striker safety spring and slide catch lever spring post.
• Printed Production Specs — A reference panel lists the P320's calibers (9mm, .357, .40 and .45), trigger type, safety and frame details.
• 11 x 17 Inch Work Surface — The oversized footprint leaves room to lay out a disassembled pistol, tools and cleaning supplies side by side.
• 1/8 Inch Vulcanized Rubber Base — Vulcanized rubber is cured for strength and elasticity, giving the mat enough cushion to protect finishes and the bench underneath.
• Non-Skid Backing — The rubber underside grips the table so the mat stays put while you work a stiff pin or spring.
• Dye Sublimation Printing — The ink is bonded into the thermoplastic fiber surface rather than sitting on top, so the diagram holds up to scrubbing and solvent contact.
• Oil Resistant and Waterproof — Gun oil, cleaner and water stay on the surface where they can be wiped away instead of soaking through.
• Washable and Rollable — Wash the mat when it gets dirty, then roll it up for storage in a range bag or drawer.

Construction And Care

The top layer is a black thermoplastic fiber surface, joined to the 1/8 inch rubber substrate with a direct vulcanized bond so the two layers do not separate. The fiber face takes the dye sublimated print and gives small parts a slightly textured surface to rest on, which keeps pins and springs from rolling away. TekMat makes this mat as a third-party accessory designed for use with the P320, and it is not associated with or endorsed by Sig Sauer.