Smith and Wesson M&P9 Compact 10-Round Magazine

M&P9 Compact Magazine

This is a factory 10-round magazine from Smith & Wesson for the M&P9 Compact pistol in 9mm. It works as a spare for the range bag, a reload for a carry setup, or a replacement for a worn original. Because it comes from the pistol's own maker, the fit and feed geometry match what the gun was designed around.

Features

• 10-Round Capacity — Holds ten 9mm rounds in a body sized for the shorter grip of the M&P9 Compact.
• 9mm Chambering — Built for 9x19mm, the standard 9mm pistol cartridge, and stamped "9mm" on the side so it is easy to tell apart from other calibers.
• Numbered Witness Holes — Small holes along the body, marked 4, 6, 8 and 10 on one side and 5, 7 and 9 on the other, show how many rounds are loaded at a glance.
• Black Metal Body — The body has a black finish with stamped reinforcing ribs running its length.
• Gray Polymer Follower — The follower, the part the spring pushes up under the rounds, is a light gray polymer that stands out against the dark body when the magazine is empty.
• Polymer Floorplate — A black polymer base plate closes the bottom of the magazine and gives your hand a surface to seat it firmly.
• Magazine Catch Cutout — A notch on the side engages the pistol's magazine release to lock the magazine in place.
• Factory Smith & Wesson Part — The S&W logo is stamped on the body, identifying it as a factory magazine rather than an aftermarket copy.

Fit and Compatibility

This magazine is made for the Smith & Wesson M&P9 Compact. The M&P line comes in several frame sizes and calibers, so confirm your pistol is the 9mm Compact model before ordering. Full-size M&P magazines and other calibers are not the same part.