Volquartsen Walther P22 Exact Edge Extractor
Out of stock
- SKU
- VCWEE
Description
P22 Replacement Extractor
The Volquartsen Exact Edge Extractor is a replacement extractor for the Walther P22, the compact .22 LR pistol. The extractor is the small hooked part in the slide that catches the rim of each fired case and pulls it out of the chamber so it can be ejected. When that hook is worn or rounded, the pistol starts leaving empties in the chamber or throwing stovepipes, and replacing the extractor is one of the most direct fixes. Owners rebuilding a well-used P22 or tuning one for more consistent function are who this part is for.
Features
- Made For The Walther P22 — Shaped to replace the factory extractor in the Walther P22 pistol.
- Exact Edge Hook Profile — The hook at the front of the extractor is the part that grips the case rim, and Volquartsen's Exact Edge design is built around getting that contact right.
- Rimfire Extraction — The P22 fires .22 LR, a rimfire cartridge with a thin rim that gives the extractor very little to hold, so the hook's shape matters more than it would on a centerfire pistol.
- Extractor Spring Included — A coil spring comes with the extractor, so the part and the spring that tensions it against the case are replaced together.
- Pivot Hole — A machined hole through the body lets the extractor pivot on its pin, and the spring keeps the hook pressed against the case rim.
- Bare Metal Finish — The extractor has an uncoated metal finish with no paint or plating on the working surfaces.
- Volquartsen Build — Made by Volquartsen, a maker known among rimfire shooters for aftermarket parts for .22 pistols and rifles.
Fit And Installation
The kit is two pieces: the extractor and its spring. It installs in the slide in place of the factory extractor. If you are not comfortable working on your pistol, have a gunsmith fit it. Replacing the spring together with the extractor means the hook is held against the case rim with fresh tension.
More Information
- More From Brand
-
Shop all Volquartsen
Customer Reviews
Top customer reviews
-
Upgrade from original but specs don't match pistolThe size and shape of the Volquartsen part are nearly an exact match for the original, with a better spring and better claw edge. The problem, however, is that the original is just a hair too long to get a good grip on the cartridge rim in my pistol. I discovered another extractor made by Lugus that has a slightly shorter length, and provides a perfect grip on the rim. This cured the failure to eject problem for me! Also, the brass now ejects uniformly to the right and down, just exactly where it should. I actually think the problem is that the extractor hole is drilled in the wrong place (out of spec) on many P22 pistols, and the Volquartsen part can't fix that.
-
Fast DeliveryThe parts are awesome. Would absolutely buy again.
-
THANKS keepshootingextractors look good. Exactly what I wanted.
-
Perfect OrderCost is perfect and shipping was fast.
-
Exactly as pictured.Cheapest price I could find that was in stock. Delivery was fast from Fedex.