IWI Masada Magazine - 17 Round

Masada 17-Round Magazine

This is the IWI-branded 17-round magazine for the IWI Masada 9mm pistol. It is a full-size spare that holds the same count the pistol was designed around, so you can fill a mag pouch, swap out a worn magazine, or keep enough loaded for a range session without stopping to reload. Masada owners who want factory parts rather than aftermarket copies are the people it is meant for.

Features

• 17-Round Capacity — Holds seventeen cartridges, the standard full-size load for the Masada.
• 9x19mm Chambering — Built for 9x19mm, the same round sold as 9mm Luger or 9mm Parabellum, and stamped with the caliber on the side of the body.
• IWI Factory Branding — The IWI logo is marked on both sides of the tube near the base, identifying it as a manufacturer-branded part.
• Black Metal Body — A black-finished metal tube with pressed side contours gives the magazine its shape and rigidity.
• Polymer Base Pad — The flared polymer floorplate is molded with a 9mm marking and gives your palm a solid surface for seating the magazine.
• Witness Holes — Small round holes in the back of the body let you check at a glance roughly how many rounds are still loaded.
• Magazine Catch Cutout — A rectangular notch in the body is where the pistol's magazine release engages to lock the magazine in place.
• Black Polymer Follower — The follower, the part the spring pushes up under the cartridges, is visible at the feed lips and molded in black.

Build And Fit

The magazine is made for the IWI Masada pistol in 9x19mm. A metal body and a polymer base pad keep it light while holding the feed geometry steady, and the body carries a Made in Italy stamp next to the IWI mark. Check your local laws on magazine capacity before ordering.