Ruger M77 Gunsite Scout 3-Round Magazine

Gunsite Scout Magazine

This is a factory Ruger 3-round magazine for the M77 Gunsite Scout, the compact bolt-action rifle Ruger built around the scout rifle concept. It is a detachable box magazine: it loads from the bottom of the rifle and drops out for reloading, so you can carry spares loaded and swap them in the field. The short body sits closer to the stock than larger magazines, which helps when you shoot prone, off a bench or from a pack rest.

Features

• Factory Ruger Part — Made by Ruger for the M77 Gunsite Scout rather than adapted from another rifle's design.
• 3-Round Capacity — Holds three cartridges, a common choice for hunters and for anyone who wants a smaller magazine under the rifle.
• Detachable Box Design — The magazine releases from the rifle as a single unit, so you reload by swapping magazines instead of feeding rounds through the action.
• Polymer Body — The molded synthetic shell is lighter than a steel magazine and does not rust.
• Compact Footprint — The short height keeps the magazine from hanging far below the stock line.
• Wide Base Plate — A flared floorplate at the bottom gives your fingers a solid edge to grab when pulling or seating the magazine.
• Recessed Side Panels — Molded panels and ribs run along both sides of the body.
• Matte Black Finish — The non-reflective black surface matches the rifle's hardware and does not catch light.

Fit And Build

The magazine is built specifically for the Ruger M77 Gunsite Scout, so confirm your rifle's model and chambering before ordering. The top of the body carries the feed lips, the shaped edges that hold the cartridge in place until the bolt strips it forward, with the follower visible between them. A spare 3-round magazine is a sensible addition for Scout owners who want a second loaded magazine on hand or a lower-profile option for hunting.