Walther P1 Safety

Walther P1 Safety Lever

This is the slide-mounted safety for the Walther P1, the 9x19mm service pistol of the Bundeswehr, Germany's post-war armed forces. On the P1 the safety also works as a decocker, letting you lower the hammer without firing the gun, so a worn or damaged lever affects how the pistol carries and handles. It suits P1 owners replacing a tired part, gunsmiths restoring a pistol to original spec, and collectors who want an authentic German Army component instead of a generic substitute.

Features

• German Army Issue — An originally issued government part from the German military, not a commercial aftermarket copy.
• Steel Construction — Machined from steel, the material the lever needs to take repeated rotation in the slide.
• Safety And Decocker Function — Rotating the lever down engages the safety and drops the hammer, so the pistol can be carried hammer-down.
• Ribbed Thumb Piece — Cut grooves across the end of the lever give your thumb purchase when sweeping it on or off.
• Spring-Loaded Detent Plunger — A small plunger set into the drum presses against the slide to hold the lever firmly in each position.
• Machined Cylindrical Drum — The drum sits across the slide, and its milled cutouts and channels interact with the firing pin and internal parts.
• Black Finish — A matte black finish matches the slide of a standard issue P1.
• Walther P1 Pattern — Built for the P1 pistol in 9x19mm, the German service designation for 9mm Luger.

Bundeswehr Issue Part

The P1 was the German Army's standard sidearm for decades, and the parts made for it were built to the military's own specification. This lever comes from that supply chain, which is why collectors and restorers value it over an unmarked replacement. Fitting a safety affects how the pistol functions, so have a qualified gunsmith install it and check operation if you are unsure of the procedure.