FN PS90 Magazine - 10 Round

PS90 10-Round Magazine

This is the factory FN magazine for the PS90 carbine and the P90, loaded to a 10-round limit in 5.7x28mm. It suits shooters who need a reduced-capacity magazine but still want original-equipment parts in their rifle. The body is translucent, so you can check your round count at a glance without unloading.

Features

• 10-Round Capacity — The magazine is limited to 10 cartridges, though the full-length body still carries molded index marks at 10, 25 and 50.
• 5.7x28mm Chambering — Built for FN's small, high-velocity 5.7x28mm cartridge, and the calibre is molded into the body.
• Translucent Smoke Polymer Body — The see-through smoke-tinted shell shows the spring, follower and loaded rounds so you know your remaining count.
• Rotating Feed Head — The black turntable at the front of the magazine turns each round 90 degrees into line with the bore as it feeds.
• Zytel Polymer Follower — The follower, the part that pushes rounds up toward the feed, is injection-molded from DuPont Zytel, a tough nylon resin.
• Chrome Silicon Spring — A chrome silicon wire spring holds tension well when the magazine is stored loaded.
• Factory FN Part — This is original equipment from FN, part number 3816101040, rather than an aftermarket copy.
• PS90 And P90 Fit — It seats in both the semi-automatic PS90 carbine and the P90.

Fit And Construction

The PS90 uses a top-mounted magazine that rides flat along the receiver, which is why the body is long and slim and has the feed head at one end. This one shares that full-length polymer shell with FN's standard magazine but holds 10 rounds. Because it comes from FN, it matches the rifle's magazine well and feed geometry exactly.