Maglula M14 Magazine Loader and Unloader

M14 Magazine Loader

The Maglula LULA for the M14 seats over the top of an M14 or M1A magazine and does the hard part of loading for you. Its lever presses the stack of rounds down so the next cartridge drops in without fighting the magazine spring with your thumb. The same tool strips rounds back out when you need to empty a magazine. It is built for M14 and M1A owners who load a lot of .308 at the range or at home.

Features

• M14 And M1A Fit — Shaped to sit over the feed lips of M14 and M1A .308 magazines, the curved metal edges at the top that hold rounds in place.
• Loads And Unloads — One tool fills magazines and also empties them, so you do not need a separate unloader.
• Lever-Operated Plunger — Pressing the long lever pushes the round stack down, which takes the spring pressure off your fingers.
• Drop-In Loading — An open loading window on top lets you drop each cartridge straight into position.
• Wire Retaining Clip — A hinged wire on the side swings across the magazine body to help hold the loader in place while you work.
• Molded Polymer Body — The black one-piece shell is molded with a lightly textured finish for grip.
• Patented LULA Design — The lever is marked with its US patent number along with Israeli and Canadian patents.
• Made In Israel — Maglula manufactures the loader in Israel, as marked on the lever.

Build And Use

Maglula is the maker of the LULA line of magazine loaders, and this model is sized specifically for the M14 magazine. Slide it onto the top of the magazine, press the lever, and drop in a round, then repeat. The loader is a single molded unit with a hinged wire clip and a small attachment ring on the side.