Otis 20 Gauge Ripcord Deluxe Gun Cleaning Kit

20 Gauge Shotgun Care

The Otis Ripcord Deluxe is a compact cleaning kit built for 20 gauge shotguns. It packs everything needed to scrub, wet-clean, oil and wipe down a gun into a set light enough to ride in a range bag or blind bag. At the center is the Ripcord, a pull-through bore cleaner that does the work of a cleaning rod without the length or the risk of a rod scraping the barrel.

Features

• Ripcord Pull-Through Cleaner — A flexible cord you feed in at the chamber end and draw out the muzzle, with a rigid helix-shaped rubber core that scrubs the bore as it passes.
• Wire-Reinforced Nomex Cable — The cord is built from Nomex, a heat-resistant aramid fiber, with wire reinforcement so it holds up to repeated hard pulls.
• Rated To 700°F — The heat-resistant materials let you clean a barrel that is still hot from shooting.
• 20 Gauge Bore Brush — A gauge-specific brush with a brass threaded fitting loosens fouling and plastic wad residue, and it locks into the T-handle for direct scrubbing.
• Cotton Bore Mop — A thick cotton mop on a brass threaded base carries solvent or oil for wet cleaning the bore.
• Shooter's Choice FP-10 CLP — A 0.5 fl oz (14.7 mL) bottle of FP-10 Lubricant Elite, a CLP, meaning one product that cleans, lubricates and protects.
• AP Brush With T-Handle — A short all-purpose brush for actions, receivers and choke threads, with a T-handle that doubles as its grip.
• Microfiber Gun Cloth — An Otis-branded microfiber cloth for wiping down the receiver, barrel and stock after cleaning.
• Made In The USA — Otis Technology manufactures the kit in the United States.

Build And Materials

The Ripcord and the threaded attachments are sized for 20 gauge bores, so this kit is the one to pick if your shotgun is a 20 rather than a 12. Brass fittings on the brush, mop and cord ends keep the hardware soft against the barrel. The whole kit weighs 5.76 ounces, and the cord coils up small enough to carry in a pocket or pouch.