Walther PPK/S Magazine

Factory PPK/S Magazine

This is a Walther-branded replacement magazine for the PPK/S pistol in .380 ACP. Carry it as a spare for concealed carry, add it to a range bag so you load less often, or use it to replace a worn original. It holds seven rounds and has a bright silver finish that suits stainless and nickel PPK/S pistols.

Features

• Genuine Walther Part — The Walther banner logo is stamped into the body near the base, so this matches the magazine the pistol was designed around.
• .380 ACP / 9mm Kurz — One side is marked Cal. 380 ACP and the other Cal. 9mm kurz, the European name for the same cartridge.
• 7-Round Capacity — The magazine holds seven cartridges in a single stack, one round directly above the next, which keeps the body slim enough for the PPK/S grip.
• Numbered Witness Holes — Six holes on one side are marked 2 through 7, so you can see how many rounds are loaded without emptying the magazine.
• Second Witness Hole — A single hole on the opposite side gives you another view of the follower and the round count.
• Bright Nickel Finish — The polished silver surface matches stainless and nickel-finished PPK/S pistols.
• Flat Floorplate — The base plate sits flush with a small forward lip, which keeps the magazine compact in a pocket or mag carrier.
• Formed Feed Lips — The folded lips at the top hold the rounds in place and release them one at a time into the chamber.

Caliber And Fit

This magazine is built for the Walther PPK/S in .380 ACP. Check the caliber stamped on your pistol's slide before you order. The .380 ACP and 9mm kurz markings on the body are the same cartridge under two names, and neither means 9x19mm Luger, which will not fit.