30.06 Laser Bore Sighter

Brass Cartridge Bore Sight

The AIM Sports 30-06 Laser Bore Sighter is shaped like a cartridge and chambers in your rifle like a live round. It projects a red dot down the line of the bore, which lets you rough in a new scope or iron sights before you head to the range. Bore sighting means aligning your sights with the barrel without firing, so you spend fewer rounds and less range time getting on paper. One unit covers three popular hunting calibers: .30-06 Springfield, .25-06 and .270 Winchester.

Features

• Three-Caliber Fit — The body is stamped 30-06/.25-06/.270 and fits rifles chambered in any of those three cartridges, which share the same case head and body dimensions.
• Chamber-Mount Design — The unit sits in the chamber like a round, so nothing has to clamp to the muzzle or slide into the barrel.
• Brass Cartridge Body — The housing is machined brass with a rim and extractor groove at the base, so it chambers and comes out much like a fired case.
• Red Laser Dot — A 635-655nm red laser puts a visible aiming point on a target or wall for lining up your crosshairs.
• 5mW Output — Laser power is rated at 5 milliwatts, enough to show a clear dot at typical indoor bore-sighting distances.
• LR-41 Battery Power — The laser runs on LR-41 button cells, a common watch-style battery that is easy to replace.
• Zero Without Firing — Rough alignment happens at home or on the bench, and live fire is only needed for the final adjustments.

How It Works

Chamber the bore sighter, close the action and aim at a target. The laser marks where the bore is pointing, and you adjust your scope's windage and elevation turrets until the crosshairs sit on the dot. A bore sighter gets you close rather than fully zeroed, so confirm and fine-tune with live rounds at the range. The model is listed under MPN PJBS3006.