Mosin Nagant Bayonet - M91/30
Out of stock
- SKU
- M91BAYO
Description
M91/30 Socket Bayonet
This is the Soviet-issue spike bayonet made for the 7.62mm M1891/30 Mosin Nagant rifle. It is a socket bayonet, meaning it has no handle: a hollow steel sleeve slides over the rifle's muzzle and locks in place. Mosin owners fit one to bring a rifle back to its full issue configuration, and collectors and WWII reenactors want it because it is the correct period pattern.
Features
- Cruciform Spike Blade — The blade has a cross-shaped section of four flat faces that taper to the point, built for thrusting rather than cutting.
- 17-Inch Nominal Blade — The blade measures about 17 inches (43 cm), adding considerable reach to the rifle.
- Approx. 19.5 to 19.8 Inch Overall Length — Measured from socket to tip, it runs roughly 19.5 to 19.8 inches (about 50 cm).
- Socket Mount With Locking Ring — The sleeve fits over the muzzle and a rotating ring turns to lock it against the rifle's front sight base.
- Fits The M91/30 Mosin Nagant — It is designed for the 7.62mm M1891/30 rifle, the standard Soviet infantry rifle of the era.
- Flat Screwdriver-Tip Point — The point is ground to a flat edge, like a screwdriver blade, instead of a needle tip.
- Carbon Steel Construction — The blade, elbow and socket are carbon steel throughout and finished dark.
- Individually Serial Numbered — Each bayonet carries its own serial number, which collectors use to document and match pieces.
Soviet Arsenal Issue
Soviet arsenals produced this bayonet pattern from 1930 to 1943 to accompany the M91/30 rifle, the period that covers the rifle's service through the early years of WWII. It is original government-issue equipment, made to the arsenal specification of the time. The design is simple: a single piece of steel with a socket, an offset elbow and the spike blade, with no grips or springs to fail.
More Information
- More From Brand
-
Shop all Russian Army
- Similar Products
Customer Reviews
Top customer reviews
-
Mosin Nagant Bayonet - M91/30I had to do a little grinding to get it to fit but it all worked out and it fits fine and looks good.
Looked new, bluing was great.
none
-
Mosin-Nagant bayonetProduct came in nearly pristine condition!
-
Perfect !!Last item I needed to complete the restore
Looks great, slid right on
Zero
-
Great product!It took a little bit of work to get it to fit on my mosin but since I did that, it has worked great! Bayonet was very sharp coming right out of the box, and looks very authentic. I urge any mosin owners who do not have a bayonet for their rifle to buy one of these, as it is getting harder and harder to find bayonets!
-
WWII BayonetMy bayonet came in good condition, but didn't come off very well so i had to tap it off with a hammer and a screwdriver. If you do that, use a towel to protect the metal on the gun and bayonet. Still not a bad product, these bayonets just weren't always made perfectly.