FAL Magazine
In stock
- SKU
- CIA-0001
Description
Features
- 20-Round Capacity — Holds a full 20 rounds of .308 Winchester / 7.62x51mm NATO, matching the original FAL magazine specification.
- Metric Pattern Fitment — Built to standard metric FAL dimensions for drop-in compatibility with FN FAL, DSA SA58, and other metric-pattern rifles.
- All-Steel Construction — Stamped steel body, follower, floorplate, and spring deliver the durability shooters expect from a service-grade rifle magazine.
- Cleanly Machined Feed Lips — Consistent, precision-formed feed lips promote reliable feeding across a wide range of .308/7.62x51mm loads.
- Bolt-Hold-Open Follower — Steel follower properly engages the FAL bolt hold-open device after the last round, just like factory FN magazines.
- Witness and Drain Holes — Side cutouts let you verify round count at a glance and allow moisture and debris to clear the magazine body.
- Parkerized Phosphate Finish — Authentic manganese-phosphate parkerizing gives these magazines the correct matte, military-issue appearance of the originals while resisting corrosion through rough handling, range use, and long-term storage.
- Faithful to the Original Austrian Design — Visually and dimensionally matches classic surplus FAL magazines for a correct look on collector and shooter rifles alike.
- Factory-Sealed Packaging — Each magazine ships individually bagged and cushioned to arrive ready for the range.
More Information
| More From Brand | 
|
|---|---|
| Similar Products |
Customer Reviews
Top customer reviews
-
Ordered four, all flawlessPicked up four of these for my DSA SA58 and they have been absolutely flawless so far. Dropped right in with zero fussing around, rocked and locked on the first try every single time, which honestly surprised me cause FAL mag fitment can be hit or miss with aftermarket stuff. The witness holes on the side are super handy at the range so I can see how many rounds I got left without having to drop the mag. Zero feeding issues, seats tight with no play in the receiver. Gonna order a couple more honestly.
Seats tight with zero play in the receiver
Zero feeding issues across four mags
Witness holes are a nice practical touchNothing really
-
Correct look and functionActually bought this because my DSA SA58 only came with two mags and original Austrian surplus is getting harder to find every year that doesn't have beat to death feed lips. This 20-rounder dropped in clean, locked into the mag well with that positive click, and the bolt-hold-open follower engaged the bolt stop on the last round just like my factory FN mags. The steel follower doesn't tilt or hang up when I top it off to a full 20 of .308. Then I discovered its also perfect for: keeping my range bag organized because the stamped steel body holds its shape and won't crush my snap caps, as a reference when I'm checking feed lip spacing on my older surplus mags that I'm not sure about, propping the tailgate gear from sliding in my truck bed, and as a teaching weight when I'm showing new shooters proper FAL reload technique without risking my good Austrian mags on the concrete. Construction is legit all steel. Mine has proper manganese phosphate parkerizing that matches the matte military finish on my other mags, the witness holes line up accurate so I can count rounds at a glance, and the drain cutouts mean no moisture trapped after wet range days. The metric pattern designation scares some inch-pattern guys off but if you run a DSA or FN this is just a really good 20-round mag.
Genuine 20-round capacity matches original FAL spec exactly
Bolt-hold-open follower engages every time like factory FNParkerizing is slightly grayer than my Austrian originals so I can tell them apart
Floorplate is tight to remove for cleaning needed a punch the first time -
Locks right into my DSA SA58 no issuesBeen building up my mag stash for my DSA SA58 and original FN steel mags have gotten stupid expensive, easily $50-90 a piece when you can even find good ones. Ordered three of these and they rock right in and lock up tight just like my factory DSA mags, tilt the front in catch the lever and they snap home no wiggle. The bolt hold open follower works perfect locked the bolt back every time on the last round which is the thing I worried about most with aftermarket. Ran 200 rounds of PMC 147gr and some Portuguese surplus through all three no failures to feed or drop. Phosphate finish is correct matte GI look matches my other mags close enough. For $35 these are a no brainer if you got a metric gun.
True drop-in lockup in my SA58
BHO follower engages every timeSprings are stiff loading the last 2-3 rounds (broke in fine)
-
Great mags for the money no complaintsPicked up four of these for my DSA SA58 and they have been absolutely FLAWLESS so far. Dropped right in with zero fussing around, rocked and locked on the first try every single time which honestly surprised me cause FAL mag fitment can be hit or miss with aftermarket stuff. The witness holes on the side are super handy at the range so I can actually see how many rounds I got left without having to drop the mag.
zero feeding issues
Seats tight with no play in the receiver -
Reliable and not over pricedI have four of these magazines and they've all run 100% reliably in my DS Arms para FAL. My only complaint is the painted finish is not great, but that's mostly an aesthetic thing. What matters is that they run great and they won't break the bank. Highly recommended!
100% reliable and cost effective
Painted finish isn't the best